Silicone rubber KDSV-25 1050g

Silicone rubber KDSV-25 (set of two components). KDSV-25 is a pourable, condensation curing 2-component silicone rubber for replicas using cast ceramic, plaster, polyester and polyurethane resins (please use priming wax as protective film on epoxy). As both component batches are matches to each other, we only supply complete batches. It is not possible to obtain individual deliveries of silicone and hardener. Good flowability Fast vulcanisation at room temperature Good tear strength and tear propagation strength.

Technical data:

Mixing ratio: 100 : 4 parts by weight silicone : catalyst, 
Processing time: 45 minutes, 
Demouldable: after 5 hours at 23 °C, 
Mixing viscosity: 19 000 mPa·s, 
Colour: White, 
Density: 1.15 g/cm³, 
Hardness Shore: A: 25, 
Elongation at break: 380 %, 
Tear propagation strength: > 18 KN/m, 
Linear shrinkage after 7 days at 23 °C: 0.5 %,
Weight: 1050g.