LilyPad USB Arduino Main Board
LilyPad Arduino Main Board
Categories
LilyPad Arduino Main Board
The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega168V (the low-power version of the ATmega168) (datasheet) or the ATmega328V (datasheet). The LilyPad Arduino was designed and developed by Leah Buechley and SparkFun Electronics.
Specifications:
Warning: Don't power the LilyPad Arduino with more than 5.5 volts, or plug the power in backwards: you'll kill it.
Microcontroller | ATmega168V or ATmega328V |
Operating Voltage | 2.7-5.5 V |
Input Voltage | 2.7-5.5 V |
Digital I/O Pins | 14 (of which 6 provide PWM output) |
Analog Input Pins | 6 |
DC Current per I/O Pin | 40 mA |
Flash Memory | 16 KB (of which 2 KB used by bootloader) |
SRAM | 1 KB |
EEPROM | 512 bytes |
Clock Speed | 8 MHz |
If you want to give a closer look to this board we advice you to visit the official Lilypad Arduino page in the Hardware Section.